( Hope this helps... by the way... my memory is that Joshua Thompson
made FV but The Captain made METAL and they are not the same person... I
believe that to be true.)
---
Future Vision Variables Listing 01/23/94
Originally done by Joshua M. Thompson
12/28/93 Sten - added a LOT of information
01/10/94 Xevious - added a few comments
This file will be completed with the RELEASE of Futurevision 4.1
1. Preface
This document is a fairly complete listing of all variables and memory areas
(including BIT/NIBBLE/etc areas) used by a "stock" Future Vision system. I
have tried to make this as complete as possible; however, the sheer size of
*FV*, and the tendancy to "make up" variables at times, make it difficult to
insure a 100% accurate listing.
[Note: As Josh is off the net for the forseeable future, someone has to keep
things rolling, so, having been asked to undertake this (in order to stay out
of someone's hair who shall remain nameless (Xevious) so they can finish *FV*
v4.1 (Xevious)), I am attempting it. If you find any errors, notify me at the
address(es) at the end.]
[Suggested use: Use ProTERM editor and OA+L to locate the varible you are
looking for.]
(comments)
[My notes]
( ,1) = The space can be a varible or a value (i.e., (x,1) or (1,1))
{file used/pointed to}
2. Allocated Memory Areas
At startup time, Future Vision executes a DEALLOCATE(0) command to free any
allocated memory areas, so don't expect any areas beyond the ones described
here to survive a system restart!
Memory areaSizeDescription
----------- ---------------
memarea(1)1024 bytes This is the Future Vision temporary memory
buffer. STARTUP.S sets the variable TEMP to
point to this area at startup time.
Note that this buffer is _very_ temporary;
many calls in STND.SUBS and various toolbox
calls will trash this area!
memarea(2)???? bytes????
memarea(3)1024 bytes Temporary storage area for the FutureNET
network kernel. It is allocated by the
NET_BootInit call, and the variable NTMP
will point to this area.
Do _not_ use this area -- it is reserved
for the network.
memarea(4)2560 bytes Holds conference host IDs and flags for the
Conferencing Manager. WORD1, WORD2, ADDR1,
and ADDR2 point into this area, which is
allocated by CONF_Startup and deallocated by
CONF_Shutdown.
memarea(127)512 bytes This area holds the binary stats for the
currently logged in user. STARTUP.S sets the
variable RAM to point to this area at startup
time.
3. System Parameters - Varibles used throughout the IEBS to control user
access and the functioning of the BBS.
a. Bit Area 0 (Maint2) {2/bit.defs}
Bit area 0 holds the security flags for the currently logged in user.
[Those not defined are user definable to suit your tastes. Those that ARE ]
[defined are used by *FV* IEBS as currently written! Be careful if you change]
[anything, either here or in your IEBS! ]
bit(0) = Validated Access
bit(1) = Standard Access
bit(2) = Xfer access
bit(3) = User shell access
bit(20) = Free Downloads (Moses v4.5+)
bit(30) = Metal User
bit(31) = Metal ML DevilOp
bit(32) = *FV* DevilOp
bit(33) = FV5 Code Show
bit(36) = FVNet Access
bit(37) = InterNet Access
bit(48) = Network Manager
bit(49) = On Vacation
bit(50) = CR+LF enabled
bit(51) = Page pausing enabled
bit(52) = expert mode enabled
bit(53) = glitter mode enabled <Emulation special graphics - user defined>
bit(54) = EDITOR:"hot dot" enabled
bit(55) = EDITOR:word wrap enabled
bit(56) = EDITOR:prompting enabled
bit(57) = Short-form network addressing option (1 = yes, 0 = no)
bit(58) = Show directory after (J)umping in the xfers
bit(59) = Clear screen before a directory listing in the xfers
bit(60) = Login quotes enabled
bit(61) = signatures on mail enabled
bit(62) = signatures on posts enabled
bit(63) = Supress long lines
b. Personal BBS Setup varibles (Maint2) {2/bbs.pers.setup|2/bbs.per.names}
These varibles can be defined and used as you like. Note: You must edit your c
bbi(0)=Can't access that <- Sysop/Programmer defined (Z, Maint2)
(In your ieb): if bbi(0)=1 print "You can't access that":return
These are basically an expansion on the bit values (above) allowing you more
flexability on what you want your bbs to do, or when writing your own IEBs.
bbi(0)
-to-
bbi(63)
c. System Setup varibles (Maint2) {2/System.Setup}
ssi(0) = Event Manager active ssi(16) = Log system callers
ssi(1) = Remote maintenance allowed ssi(17) = Log daily callers
ssi(2) = Allow non-staff users to log in ssi(18) = Log "hack-in attempts"
ssi(3) = Accept new users ssi(19) = Log new users
ssi(4) = Always execute daily events ssi(20) = Log network connects
ssi(5) = Wait Screen Blanker ssi(21) = Log uploads/downloads
ssi(6) = Use RAMdisk ssi(22) = Log system crashs
ssi(7) = Using AppleShare ssi(23) = Log net scripts
ssi(8) = Help files on ssi(24) = Log carrier drops
ssi(9) = Keywords activated ssi(25) = Put network calls in logs
ssi(10) = Use OTHER instead of *FV* Xfer ssi(26) = Log Remote Filing Manager
ssi(11) = Modem off hook on local login ssi(27) = Generate daily reports
ssi(12) = Disable User Shell ssi(28) = Log Email letters
ssi(13) = Only update stats on user logoff ssi(29) = Log Conf Subscriptions
ssi(14) = Run Network Scriptor after Host ssi(30) = [Reserved]
ssi(15) = Prevent certified mail to user #1 ssi(31) = [Reserved]
{Mostly *FV*.Xev}
\|/
ssi(32) = Posting defaults to [Y]es ssi(48) = GORP available
ssi(33) = Staff logons skip to Mail Check ssi(49) = Graffiti Wall Available
ssi(34) = Handle NetDataOut at user logoff ssi(50) = Network OFF
ssi(35) = "Write To Network?" on staff post ssi(51) = Feedback OFF
ssi(36) = Force users to Vote on Login ssi(52) = Remind to vote
ssi(37) = Allow access to MsgBase File Dump ssi(53) = Admin Members ON
ssi(38) = Skip "You're at the top menu" ssi(54) = Short Ref Strings ON
ssi(39) = Ask for posts if no new messages ssi(55) = Anon Posts = no user id#
ssi(40) = Skip over Network News @ Login ssi(56) = Keep Outgoing msgs logged
ssi(41) = Skip over Birthday Note @ Login ssi(57) = Close the msg bases
ssi(42) = Skip over Auto Msg @ Login ssi(58) = Close the xfers
ssi(43) = Disable users writing Auto Msg ssi(59) = ProByte installed
ssi(44) = Generate random Quote @ Login ssi(60) = Exodus installed
ssi(45) = Keep Net Sites in memory ssi(61) = [Reserved]
ssi(46) = [Reserved] ssi(62) = [Reserved]
ssi(47) = [Reserved] ssi(63) = [Reserved]
d. System Statistics {2/daily.stats|2/overall.stats}
stat$(0,0) = Current Date stat$(0,1) = Date bbs first started/was reset
stat$(1,0) = Idle Time (24 hrs) stat$(1,1) = Idle Time (total)
stat$(2,0) = Online Time (24 hrs) stat$(2,1) = Online Time (total)
Daily: Overall:
stat(0,0) = New Users stat(0,1) = Total # of Users
stat(1,0) = [Reserved] stat(1,1) = [Reserved]
stat(2,0) = [Reserved] stat(2,1) = [Reserved]
stat(3,0) = # of calls +1 stat(3,1) = Total # of calls
stat(4,0) = # of 300 baud calls stat(4,1) = Total # of 300 baud calls
stat(5,0) = # of 1200 baud calls stat(5,1) = Total # of 1200 baud calls
stat(6,0) = # of 2400 baud calls stat(6,1) = Total # of 2400 baud calls
stat(7,0) = # of Net calls (in) stat(7,1) = Total # of Net calls (in)
stat(8,0) = # of 9600 baud calls stat(8,1) = Total # of 9600 baud calls
stat(9,0) = # of 19.2 baud calls stat(9,1) = Total # of 19.2 baud calls
stat(10,0)= # of messages posted stat(10,1)= Total # of messages posted
stat(11,0)= # of bytes posted stat(11,1)= Total # of bytes posted
stat(12,0)= # of Uploads stat(12,1)= Total # of uploads
stat(13,0)= # of blocks uploaded stat(13,1)= Total # of blocks uploaded
stat(14,0)= # of Downloads stat(14,1)= Total # of downloads
stat(15,0)= # of blocks downloaded stat(15,1)= Total # of blocks downloaded
stat(16,0)= stat(16,1)=
stat(17,0)= stat(17,1)=
stat(18,0)= stat(18,1)=
stat(19,0)= stat(19,1)=
stat(20,0)= stat(20,1)=
e. Sysinfo (SYStemINFOrmation - READ ONLY values)
sysinfo(1) = Returns ASCII code of last key hit
(2) = Returns ASCII value of key that caused output to stop
(3) = Returns back the number of keys in the input buffer
(4) = Local Sysop Mode flag
(5) = Counts number of System Errors since Metal.System was booted.
(6) = Stores the 'chat' value {0/metal.config}
OA+0 will set sysinfo(6) to 0 (Off; Allows chat)
OA+9 will set sysinfo(6) to 255 (On; No chat)
(7) = bit7 (128) of sysinfo(6) (OA+1=1/OA+!=0)
(8) = bit6 ( 64) of sysinfo(6) (OA+2=1/OA+@=0)
(9) = bit5 ( 32) of sysinfo(6) (OA+3=1/OA+#=0)
(10) = bit4 ( 16) of sysinfo(6) (OA+4=1/OA+$=0)
(11) = bit3 ( 8) of sysinfo(6) (OA+5=1/OA+%=0)
(12) = bit2 ( 4) of sysinfo(6) (OA+6=1/OA+^=0)
(13) = bit1 ( 2) of sysinfo(6) (OA+7=1/OA+&=0)
(14) = bit0 ( 1) of sysinfo(6) (OA+8=1/OA+*=0)
sysinfo$ is an extention of the sysinfo command. Instead of returning a number
value, it returns a string.
sysinfo$(1) = Returns the last key hit in string format; no case conversion
sysinfo$(2) = Returns the key that caused the output to stop
sysinfo$(3) = Returns the version of Metal being run
sysinfo$(4) = Returns the current CIB file being run (useful to find problems)
4. Varibles (Alphabetical Listing) - All varibles can be from one to four
characters in length. Anything over four characters is chopped to four by
Metal. (gripe$ becomes grip$; eatme becomes eatm, etc.) Read the docs for
more information or if something isn't listed.
a. Varible strings:
a$ to zzzz$ - "Throwaway" varilbles; can be used anywhere for anything.
Except as already defined, the sysop/programmer has available a
great number of varible strings to use when programming/modding.
[if i$="G" print "Yes, I do.":i$="" <-Simple syntax/zeroing]
abrt$ = Abort string (" ")
abort$ = Same as above
area$ = Message Base areas
astr$ = Asteriks string ("** ")
babl$ = string of additional address to process
badw$ = Used by the Profanity Filter
baud$ = str$(baud), i.e., the string value of the baud varible.
bd$ = Site's maximum baud rate (Shouldn't be greater than 9600 at this time)
brdm$ = Name of subboard manager
brdn$ = Subboard name (Conference name on bbs, may not match Conf.List title)
brdp$ = Subboard directory. *NOT* name of storage file {1/msg.base.s}
brdp$ = pathname of destination mailbox file, if one exists {1/email.s}
chr$( ) = returns a 1 char string (ascii char for the #) (chr$(32) = space)
ci$ = Full pathname of channel info file {4/channel.info}
cm$ = Full pathname of channel map file {4/channel.map}
cmnd$ = Command string (usually sent to an entry point to tell IEB what to do)
cr$ = RETURN string (chr$(13))
dan$ = To (whom$+@+ea$ -or- str$(whom)+@+ea$)
date$ = The current date
datp$ = Date posted in the form "MM/DD/YY HH:MM:SS ZONE"
day$(1) to (7) = Day of the week string
dist$ = Distribution string <InterNet>
dir$ = Directory name in "4/SITES/" (dir$="4/sites/<sitename>")
dp$ = Mailbox path for destination program
ea$ = Site email address
edd$ = destination file for the editor {9/editor}
eds$ = {file called (source file) to be loaded into the editor}
edit$ = Can be used by programmer, along with edit$(0), edit$(5 to ?)
edit$(1) = Reads or Sets tab line for editor. (79 chars long)
edit$(2) = Either uses the current filename to load or sets filename to load
(cursource$=edit$(2) -or- edit$(2)=filename$ <-if null, blank editor)
edit$(3) = Either returns current filename to save to or sets filename to save
(curfilename$=edit$(3) -or- edit$(3)=filename$<-if null, not saved)
edit$(4) = String to print while file is being saved
emu$( ,0) = Name of emulation {2/emulations}
emu$( ,1) = Actual Map name {0/*.MAP}
esc$ = ESCape string (chr$(27))
event$(x,0) = The time of event #x in the primary queue
event$(x,1) = The days string of event #x in the primary queue
event$(x,2) = The program name of event #x in the primary queue
event$(x,3) = The parameter for event #x in the primary queue
event$(x,4) = The event's "must be executed" flag in the primary queue
event$(x,5) = Date validation string used to handle events skipped over
evt2$(x,0) = The time of event #x in the daily queue
evt2$(x,1) = The days string of event #x in the daily queue
evt2$(x,2) = The program name of event #x in the daily queue
evt2$(x,3) = The parameter for event #x in the daily queue
evt2$(x,4) = The event's "must be executed" flag in the daily queue
evt2$(x,5) = Date validation string used to handle events skipped over
f$ = Filename string
ff$ = Filename string
fm$ = FileMail filename pathname
from$ = Name of person who sent a letter (handle/alias)
gm$( ,0) = Menu command key for the Games Subroutine {2/game.data}
gm$( ,1) = Menu Title for the Games Subroutine {2/game.data}
gm$( ,2) = The run IEB (.S) for the game {2/game.data}
gm$( ,3) = The global entry lable for gm$( ,2) {2/game.data}
gm$( ,4) = Whether or not the game is Active or Inactive {2/game.data}
gripe$ = # of gripes in gripe file. {5/logon.probs}
id$ = Name of site
ipass$ = Site's call-in password (password it uses when calling us)
lc$ = Last Caller string
lit$ = Login date + time
mail$ = returns the number of letters in the defined user's mailbox
map$ = Filename of map file to use (network)
mbuf$ = Email temporary buffer file {9/email.buffer}
mfn$(1)="8/moses.setup" ! controling info for Moses
mfn$(2)="8/moses.areas" ! transfer areas access listing
mfn$(3)="8/moses.devices" ! free space devices datafile
mfn$(4)="8/moses.topup" ! top 10 uploaders
mfn$(5)="8/moses.topdown" ! top 10 downloaders
mfn$(10)="8/moses.dirdata" ! area zero directory data
mfn$(11)="8/moses.where" ! area zero where-it-at tfile
mfn$(12)="8/moses.wants" ! area zero requests/wants file
mfn$(13)="8/moses.uploads" ! area zero upload log file
mfn$(14)="8/moses.dnloads" ! area zero *download* log file
mfn$(15)="8/moses.bindata" ! area zero interlaced directory data
mgid$ = Message ID string
mnth$(1) to (12) = Month string
modem$ = Used to send a string to the modem driver/modem.
netm$ = Name of network manager
nevn$ = See nevnt$
nevnt$ = Time of next event to execute or "00:00" if none
newp$ = New User Password string
newu$ = # of new user applications
ni$ = Full pathname of global network input file {4/net.data.in}
no$ = Full pathname of global network output file {4/net.data.out}
null$ = Null string (chr$(0))
opass$ = Site's call out password (password we use when calling it)
ph$ = Site's phone number
prefix$ = Read current ProDOS prefix or define a new one
priv$ = (Usually) the name of the current privilegs file
priv$(x,0) = Pathnames of entries in current privileges file
refr$ = Reference string
repy$ = Reply to string
san$ = Handle/Alias@siteaddress (from$+ea$)
si$ = Full pathname of site's network data input (recv) file
snm$( ) = Names of defined Moses Areas (0 to # of defined areas; 0 is defined)
so$ = Full pathname of site's network data output (send) file
src$ = Source ID string
ss$ = Name of site corresponding to the variable SS
sw$ = Full pathname of a site's work directory
staff$( ,1) = Handle/Alias of staff member
staff$( ,2) = Title of staff member
status$ = Status of letter as ASCII text
subj$ = Subject line (messages/mail)
sysn$ = System Name string
sysp$ = System Password string
time$ = current time or build a time string from a clock command
type$ = Site's system type ("FV3", etc)
uorg$ = Organization string <InterNet>
usr$(0) = Real name
usr$(1) = Handle
usr$(2) = Password
usr$(3) = Address
usr$(4) = City
usr$(5) = State
usr$(6) = Phone
usr$(7) = Sex
usr$(8) = Birthdate
usr$(9) = Computer type
usr$(10) = Last call date/time
usr$(11) = Last News
usr$(12) = Last Net
usr$(13) = Last xfer date [NOT DATE/TIME!]
usr$(14) = Status
usr$(15) = User's zip code or postal code [Currently NOT used(?)]
vid$ = Read current video driver loaded or load new one.
vid$(1) = The page pause prompt string
whom$ = Destination user name (handle/alias)
yn$(0) = No
yn$(1) = Yes
zone$ = Time zone string (EST/CST/MST/PST)
b. Varible values:
a to zzzz - "Throwaway" varibles; can be used anywhere for anything.
Except as already defined, the sysop/programmer has available a
great number of varibles to assign values to when programming or
modding.
[if a=1 return:else goto xyz1:a=0 <-Simple syntax/zeroing]
access = Access granted flag (1=Yes, 0=No)
addr(0) = post counter (# read by user)
addr(1) = bytes posted
addr(10) = blocks uploaded
addr(11) = blocks downloaded
area( ) = Message Base Areas (0 to total # defined)
babl = 1 = Build Address Bulk List flag (BABL$ valid and should be used)
baud = Current connection baud rate (read only; modem(2))
bltn = Letter number in mailbox to update {1/email.s}
brdm = User number of subboard manager
brdn = Value of the subboard to set on entering the Conference Area (1)
brds = # of subboards (conferences) in area(0) (all areas, i.e., total #)
bn = Value of the subboard to set on entering Conferences via Quickscan (1)
byte(0) = minutes allowed per call
byte(1) = minutes allowed per day
byte(2) = minutes spent online today
byte(3) = number of nulls to send after a CR
byte(4) = lines per page
byte(5) = terminal emulation number
byte(10) = protocol in xfers
ch = Channel number
chtyp = Channel subtype of this block
clock = System value/varible-read in seconds only(60=1min/3600=1hr/86400=24hrs)
clock(0) = update time display in upper rt hand corner of screen (hardly used)
clock(1) = (timer,option) Reset timer 1. Cannot be read or equated to.
clock(1,1) = ^^ How long, in seconds, since the timer was reset. Read only.
clock(1,2) = ^^ Set or check time remaining in counter. Write & Read.
clock(2) = (timer,option) Reset timer 2. Cannot be read or equated to.
clock(2,1) = ^^ How long, in seconds, since the timer was reset. Read only.
clock(2,2) = ^^ Set or check time remaining in counter. Write & Read.
clock(3) = (timer,option) Reset timer 3. Cannot be read or equated to.
clock(3,1) = ^^ How long, in seconds, since the timer was reset. Read only.
clock(3,2) = ^^ Set or check time remaining in counter. Write & Read.
clock(4) = (timer,option) Reset timer 4. Cannot be read or equated to.
clock(4,1) = ^^ How long, in seconds, since the timer was reset. Read only.
clock(4,2) = ^^ Set or check time remaining in counter. Write & Read.
clock(5) = Used in GET and INPUT subroutines. (Trap Clock(5) goto TimeOut)
Does not need resetting, as it is reset upon key press.
clock(5,1) = # of seconds since a key was pressed. Read only.
clock(5,2) = # of seconds user has to press a key. Write & Read
cost = The total cost of this route in cents per kilobyte
dest = Number of destinations
dest( ) = Destination site number. If this is zero, then the following
are used instead:
dest(x,0) = Number of hops in custom route.
dest(x,y) = Custom route, where y goes from 0 to DEST(x,0). The custom
route must start at the source and end at the destination;
therefore, there are always at least two sites on the route.
dp = Destination program number
d = Destination site ID
ds = Destination site number
edit(1) = Put user into editor
= 1 = Line Editor
= 2 = FullScreen Editor
edit(2) = Read only; # of lines in editor buffer
edit(3) = Read only; editor error code
= 0 = No error, file was saved correctly
= 1 = User aborted, nothing saved
= 2 = User attempted to save empty editor file
= 3 = file was not saved to disk; edit$(3) value wasn't set up
= 4 = file was not saved to disk correctly; ProDOS error
edit(4) = Current justification mode
= 0 = No justification
= 1 = Left justification
= 2 = Right justification
= 3 = Center justification
edit(5) = Current Hot Dot mode
= 0 = Off
= 1 = On
edit(6) = Current Word Break mode
= 0 = Off
= 1 = On
edit(7) = Current Prompting mode (Line editor only)
= 0 = Off
= 1 = On
edit(8) = Outfile control (how editor is saved)
= 0 = Save normally, will overwrite existing file (See edit$(3))
= 1 = create, w/error. Will error if edit$(3) file exists
= 2 = append to existing edit$(3) (if file exists)
edit(12)= Allow PTSE use in the editor (defaults to staff only)
edit(13)= Allow inverse in the editor (defaults to staff only)
emu = Current Emulation (points to map) {2/emulations}
emu( ,2) = {2/emulations}
emu( ,3) = {2/emulaitons}
err = Error Code (global system varible)
evnts = The number of events in the primary queue
evt2 = The number of events in the daily queue
evt2(x,5) = main event # of this sub-event record (used for skipper)
fmms = FileMail max size
frm = # of form letters defined
from = User number of person who sent a letter
hop = Next hop site number
hops = The number of hops required to get there
hsdd = Host default timeout
hsof = Host default flags
lines = Number of lines in the header
maon = Mail file counter
mask = Access mask. The available privileges for the specified directory are
bitwise ANDed with this mask, and if the result doesn't equal the
mask, then access is not granted.
modem = Set up or read what the modem is doing
modem(1) = Modem state - Write & Read value
= 0 = Reset modem
= 1 = Hang up and disconnect modem
= 2 = Auto answer on next call
= 3 = Have modem generate carrier
= 4 = Take modem off hook
{result} = 0 through 4 = last state executed
= 5 = Modem has good connection; is now online.
= 6 = Modem has lost carrier (or OA+D was detected)
=-1 = Modem driver is busy (Not used much; see modem(1)=5)
modem(2) = Baud rate - Read only value (baud=modem(2))
modem(3) = Nulls sent - Read & Write value
modem(4) = LF added to CR - Read & Write value
modem(5) = Modem Carrier signal check - Read only value
modem(6) = Modem Result code - Read only value
msg = File channel to read from
msgid = ID # of message
msid = msgid counter
ndev = Total number of devices (drives) defined for use by Moses
netm = User number of the network manager
nevnt = Next event to execute (index into daily queue). Zero if none
nibble(0) = calls allowed per day
nibble(1) = calls made today
nibble(2) = Editor justification mode
nibble(3) = Editor type
nlrp = Net Last Read Position
nsec = Total number of Moses Areas-1 (First area is always defined)
ntmp = (N)etwork (TEMP)orary area
ourid = Site ID of the bbs (Global system varible) Do not modify!!
parm( ) = Subboard parameters
(0) = New message value
(1) = Autokill value
(2) = Anoymous posting (yes/no)
(3) = Maximum # of messages
(4) = Net conference number
(5) through (9) = <undefined>
priv = Number of entries in current privileges file
priv(x,1) = Access settings for entries in current privileges file
priv(x,2) = Reserved fields for entries in current privileges file
saf( ) = flag necessary for a user to access this Moses Area (0 to # of areas)
scdd = Scriptor default timeout
scof = Scriptor default flags
sites = Number of sites in the 4/net.sites file. The network manager reads
this value at startup time and modifies it if necessary when you
make a net_writesite call. Do not modify this value!!
size = Size of block in bytes
src = Source site ID of this block
ss = Source site ID of a letter
ssf( ) = staff level to access Moses Area; if set. Default=All Users (See saf)
staff( ,0) = User # of staff member (1 to # of Staff Members)-|
staff( ,3) = Staff level access of staff member (1, 2, or 3) -|/
staff( ,4) = Site ID of staff member (left blank for now - not in use)
stfm = # of Staff Members (x=1 to stfm [last in list])
status = Status code / subtype of a letter
+0 : \
+1 : | Letter type (0=nrml, 1=sys notice, 2=email notice, 3=telegram)
+2 : /
+3 : Read? (0=not read, 1=already read)
+4 : Certified? (0=not certified/receipt already sent, 1=certified)
+5 : Forwarded? (0=not forwarded, 1=forwarded)
+6 : FileMail Letter? (0=no, 1=yes)
+7 : \
+8 : | Reserved, set to 0 for future compatibility
+9 : /
+10 : Marked for deletion (0=no, 1=yes)
+11 : Format flag (0=old format [+0 thru +7 is old code], 1=new format)
sz1 = bytes to SEND
sz2 = bytes to RECEIVE
user = account number
usr = Source user # of this block
vid(1) = Width of screen (default is 80 columns)
vid(2) = Bottom line of screen plus one (default is 24 lines)
vid(3) = Left column of the screen (default is 0)
vid(4) = Top line of the screen
vid(5) = AutoPos flag {0/metal.config,AUTOPOS=<yes(1)/no(0)>}
= 0 = print at(x,y)'s are not converted into emulation codes.
= 1 = print at(x,y)'s are converted into emulation codes.
vid(6) = Local Emulation flag
= 0 = local (and some remote) emulation handled normally
= 1 = all emulation codes are ignored
= 2 = all control codes are displayed in inverse (local screen only)
vid(7) = Video character of the local cursor {0/metal.config,CURSOR=< >}
vid(8) = Scroll Lock flag
= 0 = normal scroll
= 1 = no local scrolling of the screen
vid(9) = Cursor Track flag (for local cursor display) 0=local cursor OFF
vid(10) = Sound On/Off flag (0=local sound off/1=local sound on <default>)
vid(11) = Affects when the time display is updated (upper right hand corner)
vid(12) = Also affects time display (see vid(11))
vid(13) = Makes the system beep and flash(<-GS only) once a second (Chat or ?)
vid(14) = If it is on (1), then PAGE is displayed in status bar
vid(15) = Auto Page Pausing
= 0 = Pausing off
= 1 = Pausing on, uses vid(16) and vid$(1)
vid(16) = Number of lines per 'page' before pausing.
whom = Destination user number
word(0) = total calls made
word(1) = posts made total
word(10) = files uploaded
word(11) = files downloaded
word(12) = timeout in xfers
-----------------
You can contact me at the following:
BBS:
TNG 619/966-0114 12-14.4k USR Dual Standard HST (*FV* Site #19)
or from any BBS on the FutureNet/InterNet:
FutureNet: InterNet: CompuServe:
#1@#19 sten@next-gen.calif.fnet.org 73326,2407
Sten@#19
#1@next-gen.calif.fnet.org
@next-gen.calif.fnet.org